Update!!!!

Couldn't get an appropriate image for this post other than this old picture of my shelf, which I posted on my DA.
Figured that this post would best be displayed here on the main blog rather on the Assembly Line side of things since it's quite important compared to the usual gibberish.

As most of you may have noticed by now, I was MIA for quite sometime (if you didn't notice, then that's good). A rather urgent and important family matter came up (I'd rather not discuss it here) and I had to stray away from papercrafting for the past, I dunno... 2-3 weeks now?

I even missed the whole 1 yr anniversary of Leblanc's release and of the blog too, which of course was the release date I hoped for Yuffie.

So as far as my KH2/FF7:AC Yuffie Kisaragi project goes, she's half built sitting on my desk and won't be completed anytime soon seeing as the new school year is practically starting already.

Now for the rest of my projects, I AM NOT DROPPING THEM from the project list. I will eventually finish them all, it'll take some time but I will finish them.

So, again.... all my projects will experience quite a huge delay in getting released.

Well, I suppose that's all for now, there really isn't anything else I can do at the moment than just make this update.

ps: Sorry, but I don't have an updated picture of my papercraft shelf, so the old one would have to do for now.

Read more

KH: The Battleship Release

The Battleship
Well, finally finished this project. I could have gotten this done sooner, but sadly procrastination and the urge to cool myself off in the pool was too much to bare over the heat of the summer.

Anyway, this was an easy build, fiddly parts are the skull and the small parts that go into making the wheel. Other than that, everything else was smooth sailing! (ehe, get it... smooth sailing... coz, it's a ship.. and it has a sail...)

Because of the success of this model, I added a new category into my Media Fire folder, a Kingdom Hearts: Heartless folder. This simply means that I'm going to build other Heartless models in the future.

So that's that... time to start working on another project before my summer vacations ends.... Good luck to anyone who's willing to build The Battleship!

Read more

Tifa Lockhart Release

Tifa Lockhart
Tifa has been a WIP for nearly the past 7 months now. Initially, Tifa was meant to be released back in July 2009, however due to unforeseen issues with her neck I had to put the project on hold till I fix the neck and re-build the model.

I'd like to say it's because of school work that delayed the release, but really it's the lack of interest to complete and finalize the template and Reference Manual.

Anyway, I finished whatever needs to get done and now it's time for the release. So you people, who's been pestering me about Tifa can now "rejoice" because she's here. Now go bother someone else, yeh?

These two finally got together....

Also: I hope to see Tifa have the same success as Cloud;

Read more

Happy Moogle New Year!

A Happy New Year to you all, kupo!
Well, here's a proper send off to 2009 and a good way to start off the new year!

Currently staying over at my grandparents for the holidays to celebrate Christmas and New Year with the entire family. We don't always do this, so, it's rather special having the entire family together at my Mom's parents home. (not to mention it's easier for me to cash in with aunts and uncles who I haven't seen in a while! ahahaha)

Anyway.... I had these models completed for a few weeks now, but I've delayed the release long enough mainly because I was too busy with school work to even give time to finalize the templates and finish up on the Reference Manuals. It's not all that hard to do, but I can't concentrate on my work knowing that I have 6 school projects and finals to deal with!

So, here they are:
Horne
Note: There were issues with the Reference Manual for Horne, so refer to Sorbet's Reference Manual instead if things are a bit difficult to understand.

Hurdy
Montblanc
Sorbet

That's it! All 6 members of the Moogle Family from Final Fantasy XII has been pepakurized, finally finished this project. And now... a group pic, of every single one of them together! (told yah I would eventually have everyone)

My entire FFXII Moogle Family and Momo would like to greet everyone a Happy and Prosperous New Year!

Read more

Moogle-Palooza: Gurdy

Here's Gurdy!
Well, here's the 2nd Moogle out of the 6 proposed members of the Moogle Family that I've built so far. Gurdy turned out quite well, even though I ran through a bunch of trouble while trying to get her posed right using the reference pic I had of her. Once again though, I have to apologize for the poor printing quality. I haven't saved up enough to buy new ink carts for the HP printer, hopefully I'll save up enough by next week.

Finally took a picture of how to assemble the pom-pom without me trying to explain how the heck it's supposed to be made. Well, even though it's self explanatory, I've gotten quite a few comments from individuals complaining about it... so there you go.

It's quite tough getting a picture of Gurdy hovering.... she tends to twirl around before I get a decent picture of her. Well, she is after all the only Moogle from FFXII that's actually using her wings.

Well, guess that's just about it... nothing more for me to say than to wish you good luck!

Final Fantasy XII Gurdy

I'll eventually get the entire Moogle Family and Momo together!

Read more

Moogle-Palooza: Nono

Well, finally got my MediaFire folder back online and I can release this little fellow! Thanks to the folks at MF of course!

So anyway, you guys voted for Nono, so Nono is all yours. Before you guys wonder what those streaks are in the model, those were caused by the Canon printer I was using. Unfortunately my HP printer ran outta ink yet again, so I had to settle with the old bubble jet printer. So there's a definite lack in printing quality, well either that or I don't get to print anything at all. Meh.

Tried something slightly different with this release, didn't include a "Lined" .PDF. My models are all meant to be "Lineless" and built smoothly. The Reference Manual also changed slightly, but it still serves as reference only. You can freely choose a way that's comfortable for you to build Nono. Oh, and yes I know the er.. spanner(?), is pointing away from Nono, that's because I didn't fold the palm and the wrist to get it to tilt towards Nono. It still works, so that's fine with me.

Gurdy and Sorbet are currently in the works, so expect another release in the next few days.

Anyway, that's just about it... knock yourselves out. Good luck!

Final Fantasy XII Nono

Momo wanted to join in the spotlight with Nono

Read more